Our Geoprobe technicians are ready to help! If you are in need of environmental drilling, we are your solution. Our teams are experienced and trained in environmental assessments, LSI’s, and temporary wells. We can probe or auger to depths of 100 feet, providing a continuous core sample of unconsolidated materials. With up-to-date equipment and a positive attitude, no job is too big or too small; as your partner, we will solve all your environmental drilling needs.
Geoprobe Drilling (Printable PDF)
Two Rig Fleet
- One Geoprobe 7800 with Auger head on 4x4 Dodge
- One Geoprobe 6610DT with Auger on tracks
- Air knife available
Capabilities
- Probe up to 100 feet
- Auger up to 50 feet
- Petro-fund registered contractor
- Drill monitor, recovery, and residential wells
- Sample soil, water, and soil vapor up to 100 feet
- Continuous core samples of unconsolidated materials
- Discrete interval sampling capabilities
- Sil and sub-slab vapor implants
- Vertical and horizontal well abandonments
- Drill 4” and 6” wells up to 50 feet
- Set 2” and 4” wells up to 50 feet
- Track rig can fit into smaller, indoor locations
- Air knife can be used with or without water for pot hole and utility verification
Geoprobe Resources
Geoprobe® DT22 Soil Sampling System
This is a direct push system for collecting continuous core samples of unconsolidated materials from within a sealed casing.
Macro-Core® MC5 Soil Sampling System
This single tube, discrete or continuous core sampler system with unmatched durability was designed for conditions where probing is not usually recommended.
SP16 Groundwater Sampler
The Screen Point 16 Groundwater Samplers are used to collect groundwater samples from unconsolidated materials at depths ranging from near ground surface to over 100 feet below grade.
SP22 Groundwater Sampler
The Screen Point 22 Groundwater Sampler was designed to keep the screen away from all percussive energy while the sampler is lowered downhole, thus extending the life of the screen.
Soil Vapor Implants and Post Run Tubing
This active sampling method was developed as a simple, quick, cost effective method for conducting soil gas surveys.
Soil Vapor Implants
Permanent implants have been used for years for soil gas sampling, air sparging, and groundwater sampling. Geoprobe® stainless steel implants are unique in their ability to be “Post Run”.